Passwords and IP Addresses for Surveillance Cameras
Acti
Username: Admin/admin
Password: 12345/123456
IP address: 192. 168.0.100
Arecont Vision
Arecont does not have a default password , but you can reset it to factory settings. Follow these steps
1-Access the camera's web interface by typing the IP in your web browser.
2-Under the Administration or System tab, click on Restore to Factory Default.
3-Once the camera reboots, all settings on the camera will be restored to factory default
AXIS
For an old system:
Username: Root
Password: Pass
IP Address: 192.168.0.90
But new generation AXIS cameras have a resetting sequence
1-Remove the Ethernet cable
2-Press and hold the control button and insert the Ethernet cable again while holding the control button.
3-Hold the control button until the amber lights turn on.
4-Then release the button .
5-Wait about 1 minutes.
6-When the amber lights turns into the green lights your camera is resetted and your passoword as well
BOSCH
For old models:
Username: service
Password: service
IP Address: 192.168.0.1
For new models:
You can reset the camera by pushing the reset button about 7 seconds. Or you can reset the NVR by removing the battery on the mainboard (not recommended, at your own risk)
DAHUA
Username: admin
Password: admin
GEOVISION
Username: admin
Password: admin
IP Address: 192.168.1.108
HIKVISION
For old models (before firmware 5.3.0)
Username: admin
Password: 12345
IP Address: 192.0.0.64
For new models you can reset password via SADP tool. Please click the link below and follow the instructions on the pdf file
Hikvision password resetting guide
LTS
Username: admin
Password: 12345 or123456
For platinum models please click the link below for pdf file.
LTS platinum series password reset
Messoa
Username: admin
Password: 1234 or model number of camera
IP address: 192.168.1.30
Mobotix:
Username: admin
Password: meinsm
SAMSUNG Techwin
For old models
Username: admin
Password: 111111 or 1111111
For new models
Username: admin
Password: 4321
IP Address: 192.168.1.200
SONY
Username: admin
Password: admin
IP Address: 192.168.0.100
SpecoFor old models:
Username: root or admin
Password: root or admin
For new models:
Username: admin
Password: 1234
IP Address: 192.168.1.7
Ubiquiti
Username: ubnt
Password: ubnt
IP Address: 192.168.1.20
Videocom
Username: admin
Password: 12345
Vivotech
None . You can choose your own password after setup. If you want to reset it
1-Press and hold down the reset button for at least 1 minute
2-Power on the camera until the red light flashes rapidly
Now your camera is back to factory default without any password.
Username: Admin/admin
Password: 12345/123456
IP address: 192. 168.0.100
Arecont Vision
Arecont does not have a default password , but you can reset it to factory settings. Follow these steps
1-Access the camera's web interface by typing the IP in your web browser.
2-Under the Administration or System tab, click on Restore to Factory Default.
3-Once the camera reboots, all settings on the camera will be restored to factory default
AXIS
For an old system:
Username: Root
Password: Pass
IP Address: 192.168.0.90
But new generation AXIS cameras have a resetting sequence
1-Remove the Ethernet cable
2-Press and hold the control button and insert the Ethernet cable again while holding the control button.
3-Hold the control button until the amber lights turn on.
4-Then release the button .
5-Wait about 1 minutes.
6-When the amber lights turns into the green lights your camera is resetted and your passoword as well
BOSCH
For old models:
Username: service
Password: service
IP Address: 192.168.0.1
For new models:
You can reset the camera by pushing the reset button about 7 seconds. Or you can reset the NVR by removing the battery on the mainboard (not recommended, at your own risk)
DAHUA
Username: admin
Password: admin
GEOVISION
Username: admin
Password: admin
IP Address: 192.168.1.108
HIKVISION
For old models (before firmware 5.3.0)
Username: admin
Password: 12345
IP Address: 192.0.0.64
For new models you can reset password via SADP tool. Please click the link below and follow the instructions on the pdf file
Hikvision password resetting guide
LTS
Username: admin
Password: 12345 or123456
For platinum models please click the link below for pdf file.
LTS platinum series password reset
Messoa
Username: admin
Password: 1234 or model number of camera
IP address: 192.168.1.30
Mobotix:
Username: admin
Password: meinsm
SAMSUNG Techwin
For old models
Username: admin
Password: 111111 or 1111111
For new models
Username: admin
Password: 4321
IP Address: 192.168.1.200
SONY
Username: admin
Password: admin
IP Address: 192.168.0.100
SpecoFor old models:
Username: root or admin
Password: root or admin
For new models:
Username: admin
Password: 1234
IP Address: 192.168.1.7
Ubiquiti
Username: ubnt
Password: ubnt
IP Address: 192.168.1.20
Videocom
Username: admin
Password: 12345
Vivotech
None . You can choose your own password after setup. If you want to reset it
1-Press and hold down the reset button for at least 1 minute
2-Power on the camera until the red light flashes rapidly
Now your camera is back to factory default without any password.
For other brand's usernames and passwords please see below
| Camera Manufacturer | Username | Password | Default IP |
| 3xLogic | admin | 12345 | 192.0.0.64 |
| ACTi | Admin or admin | 123456 | 192.168.0.100 |
| American Dynmics | admin | admin | 192.168.1.168 |
| Arecont Vision | admin | no set password | no default/DHCP |
| Avigilon | admin | admin | no default/DHCP |
| Axis | root | pass or no set password | 192.168.0.90 |
| Basler | admin | admin | 192.168.100.x |
| Bosch | service | service | 192.168.0.1 |
| Bosch | Dinion | no set password | 192.168.0.1 |
| Brickcom | admin | admin | 192.168.1.1 |
| Canon | root | Model# of camera | 192.168.100.1 |
| CBC Ganz | admin | admin | 192.168.100.x |
| Cisco | no default | no set password | 192.168.0.100 |
| CNB | root | admin | 192.168.123.100 |
| Costar | root | root | unknown |
| Dahua | admin | admin | 192.168.1.108 |
| Digital Watchdog | admin | admin | 192.168.1.123 |
| DRS | admin | 1234 | 192.168.0.200 |
| DVTel | Admin | 1234 | 192.168.0.250 |
| DynaColor | Admin | 1234 | 192.168.0.250 |
| FLIR | admin | fliradmin | 192.168.250.116 |
| Foscam | admin | [leave blank] | unknown |
| GeoVision | admin | admin | 192.168.0.10 |
| Grandstream | admin | admin | 192.168.1.168 |
| GVI | Admin | 1234 | 192.168.0.250 |
| HIKVision | admin | 12345 | 192.0.0.64 |
| Honeywell | administrator | 1234 | no default/DHCP |
| IOImage | admin | admin | 192.168.123.10 |
| IPX-DDK | root | Admin or admin | 192.168.1.168 |
| IQInvision | root | system | no default/DHCP |
| JVC | admin | Model# of camera | no default/DHCP |
| LTS Security | admin | 123456 | unknown |
| March Networks | admin | [leave blank] | unknown |
| Merit Lilin Camera | admin | pass | no default/DHCP |
| Merit Lilin Recorder | admin | 1111 | no default/DHCP |
| Messoa | admin | Model# of camera | 192.168.1.30 |
| Mobotix | admin | meinsm | no default/DHCP |
| Northern | admin | 12345 | 192.168.1.64 |
| Panasonic | admin | 12345 | 192.168.0.253 |
| Panasonic | admin1 | password | 192.168.0.253 |
| Pelco | admin | admin | no default/DHCP |
| PiXORD | admin | admin | 192.168.0.200 |
| PiXORD | root | pass | 192.168.0.200 |
| QVIS | Admin | 1234 | 192.168.0.250 |
| Samsung | root | 4321 or admin | 192.168.1.200 |
| Samsung | admin | 4321 or 1111111 | 192.168.1.200 |
| Sanyo | admin | admin | 192.168.0.2 |
| Sentry360 | Admin | 1234 | 192.168.0.250 |
| Sony | admin | admin | 192.168.0.100 |
| Speco | root | root | 192.168.1.7 |
| Speco | admin | admin | 192.168.1.7 |
| StarDot | admin | admin | no default/DHCP |
| Starvedia | admin | no set password | no default/DHCP |
| Toshiba | root | ikwb | 192.168.0.30 |
| Trendnet | admin | admin | 192.168.10.1 |
| UDP | root | unknown | unknown |
| Ubiquiti | ubnt | ubnt | 192.168.1.20 |
| W-Box | admin | wbox123 | 192.0.0.64 |
| Wodsee | admin | [leave blank] | unknown |
| Verint | admin | admin | no default/DHCP |
| VideoIQ | supervisor | supervisor | no default/DHCP |
| Vivotek | root | no set password | no default/DHCP |
Komentar
Posting Komentar